Product Description Want create site? Find Free WordPress Themes and plugins.LV8729 stepper motor driver module in the common StepStick style format Note this part replaces the previous part supplied for orders prior to 30 March 2021. If you purchased prior to 30 Mar 2021 the reference information is available here: Discontinued Products (This version has the adjustment pot on the top side otherwise they are functionally identical) Note: 16 Aug 2020: A customer received one of these from us with bent pins. From this date forward I will be opening these prior to shipping to ensure this does not happen again. So if you wonder why it was already opened I did it. Plug in replacement for A4988 & DRV8825 on any board that accepts StepStick format drivers up to 1/128 microstepping quiet maximum 2.0A if adequately cooled according to supplier Quiet stepper motor Drivers LV8729 Input voltage: 6-36V Max current: 1.5A (Module supplier says 2A but they copy / pasted a bunch of other incorrect information so I don’t trust them) Micro Stepping: 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128 Heat sink included so USE IT LV8729V-Datasheet Module pins: Make sure you orient it correctly in your controller board or you may kill it Microstep settings: Micro stepping jumpers M1 M2 M3 1 full step 0 0 0 1/2 step 1 0 0 1/4 step 0 1 0 1/8 step 1 1 0 1/16 step 0 0 1 1/32 step 1 0 1 1/64 step 0 1 1 1/128 step 1 1 1 Current settings The output motor current is set according to VREF. VRef is measured Viewed from the top Rotate the potentiometer clockwise to decrease vRef & anticlockwise to increase vRef Be gentle, it is a small surface mounted potentiometer Precautions: Adjust without the motors connected to avoid potential damage to your motors (once you have your desired settings then connect your motors) If your motors run hot afterwards, recheck your calculations, dial it back.. The sense resistors on these modules are R220 = 0.22 ohms so the formula for setting vRef per the datasheet is: I = (VREF / 5) / 0.22 so: VREF = I * 1.1 Example: if your desired current is 1.2A: VRef = 1.2 * 1.1 = 1.32V My handy tables: Heat sink orientation Did you find apk for android? You can find new Free Android Games and apps.
