LilyGO TTGO T-Display V1.1 ESP32 with 1.14″ TFT LCD

Product Description Want create site? Find Free WordPress Themes and plugins. Google ‘LilyGo TTGO T-Display ESP32’ for more information The TTGO T-Display from LilyGO is a microcontroller based on an ESP32 with a built-in 1.14 inch TFT display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a USB-C connection with which it can be programmed and/or powered (USB-C cable not included). Specifications: Supply voltage: 3.3V DC or 5V DC GPIO Voltage: 3.3V* ESP32 chip (240Mhz dual core processor) SRAM: 520KB Flash memory: 4MB Built-in Wi-Fi Built-in Bluetooth Built-in 1.14 inch (240×135) TFT (IPS) display (ST7789) Built-in push button Built-in Li-ion/Li-Po battery charging circuit: TP4054 chip can charge up to 500mA USB to serial converter: CP2104 or CH9102F (drivers) Battery connector: 2p Molex Picoblade PCB dimensions: 51.4 x 25.2mm Package contents: 1x TTGO T-Display V1.1 board 1x Battery cable: 2p Molex Picoblade 1x Male header set For more information and to get started with the board, see the following page: TTGO-T-Display To program the board with the Arduino IDE select the ‘ESP32 Dev Module’ in the board manager. *Note: The pins on the board are directly connected to the ESP32 chip and are therefore only suitable for 3.3V signals. For 1.14 inch ST7789V IPS LCD Resolution: 135 x 240 High Density 260 PPI 4-Wire SPI interface Working Power Supply: 3.3V 1.14″ diagonal Full-color TFT Display Drive: ST7789 Hardware Specifications Chipset ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH QSPI flash 4MB /16MB SRAM 520 kB SRAM Button Reset Modular interface UART、SPI、SDIO、I2C、LED PWM、TV PWM、I2S、IRGPIO、ADC、capacitor touch sensor、DACLNA  pre-amplifier Display IPS ST7789V 1.14 Inch Working voltage 2.7V-4.2V Working current About 67MA Sleep current About 350uA Working temperature range -40℃ ~ 85℃ Size&Weight 51.52*25.04*8.54mm(7.81g) Power Supply Specifications Power Supply USB 5V/1A Charging current 500mA Battery 3.7V lithium battery JST Connector 2Pin 1.25mm USB Type-C Wi-Fi Standard FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC（esp32 chip） Protocol 802.11 b/g/n(802.11n，speed up to150Mbps)A-MPDU and A-MSDU polymerization，support 0.4μS Protection interval Frequency range 2.4GHz~2.5GHz(2400M~2483.5M) Transmit Power 22dBm Communication distance 300m Bluetooth Protocol Meet bluetooth v4.2BR/EDR and BLE standard Radio frequency With -97dBm sensitivity NZIF receiver Class-1,Class-2&Class-3 emitter AFH Audio frequency CVSD&SBC audio frequency Software specification Wi-Fi Mode Station/SoftAP/SoftAP Station/P2P Security mechanism WPA/WPA2/WPA2-Enterprise/WPS Encryption Type AES/RSA/ECC/SHA Firmware upgrade UART download/OTA（Through network/host to download and write firmware） Software Development Support cloud server development /SDK for user firmware development Networking protocol IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT User Configuration AT Instruction set, cloud server, android/iOSapp OS FreeRTOS Many serious and trivial applications Did you find apk for android? You can find new Free Android Games and apps.